2 For your safety
Back to contents >
Merrychef conneX
®
service and repair manual 16
Safety hazard: moving heavyweights
Where or in what situations does the hazard arise?
overstressing your
body
When moving the appliance
Use a forklift truck or pallet truck to
place the appliance in the installation
position or to move it to a new position
Always use the correct number of
persons and observe the limits specified
for lifting and carrying when adjusting
the appliance position
Observe the local occupational safety
regulations
Wear personal protective equipment
Safety hazard: moving appliances supported on a wheeled base
Where or in what situations does the hazard arise?
body parts
While appliances are being moved on a wheeled platform
When servicing, engage the parking
brake on the wheels
feet being pinched
Risk of electric
shock from live
parts
While appliances are being moved on a wheeled platform
Disconnect the appliance from the
electrical supply before moving it
Safety hazard: smoke or fire
Where or in what situations does the hazard arise?
smoke from
defective electrical
components or
wrong electrical
connections
If one of the electrical components is defect, for example
due to a short circuit, or if the internal wiring is refitted
incorrectly when servicing/repairing the oven
Never use electrical spare components
which failed in a dedicated test or which
bear visible damages
Carefully refit electrical connections
using the wiring diagrams provided in
this manual
Safety hazard: electronic component damage
Where or in what situations does the hazard arise?
component
damage within
oven
The human body can store enough static electricity to
damage the electronics within the oven, especially the UI
& IO boards
When working on the UI, or IO, and
associated wiring, anti-static
precautions must be taken, such as
wearing an ESD wrist strap. IMPORTANT
- oven power supply and all capacitors
must be proved dead first