Safety
Operating Manual MXPC 303 Z/603 T 13
Beware of applications using hazardous substances!
The requirements laid down in the safety data sheets of the manufacturers must be complied
with for hazardous substances.
Prevent toxic and environmentally harmful substances escaping from the equipment.
Use the attachment parts to protect the environment and equipment (see
chapter 4.3 Attachment parts).
Check the tightness and strength of the connection lines and all other connected
components.
Hazardous substances should be separated as much as is technically possible before
entering the pump.
For applications involving aggressive media, the user must assess the
resistance of the wetted parts of the device (see chapter 4.2.3 Material).
Danger to life due to electric current.
There is an immediate danger to life from electric shock if live parts are touched.
It is generally prohibited to open the device.
Observe the following instructions:
It is prohibited to operate the device without the casing.
If the device is defective, switch it off and disconnect the mains plug.
The mains plug and the cable must be in perfect condition.
Main protective conductor: The connection must comply with the legal requirements.
Beware that the device is permanently connected and may not be considered portable.
2.4.3 Mechanics
Improper use or manipulation of the device can cause material damage to the
connected devices or the equipment!
External mechanical stresses and vibrations must not be transmitted to the
device.
The device may be connected with a flexible laboratory hose only (e.g., a metal
hose).
To Next Page
Loading...
