Welch MXPC 603 T - Temperatures

Safety
14 Operating Manual MXPC 303 Z/603 T
2.4.4 Temperatures
CAUTION
 Hot surface: Do not touch, risk of injury!
 High temperatures at the motor housing and surrounding areas (Fig. 2-1) during
operation. Can cause burns, do not touch.
If operating the main switch Fig. 5-2/2), avoid touching hot surfaces.
The operator must ensure safe operation and take precautions to protect the
user, where necessary (see chapter 2.3 Safety precautions).
MEDIA/OPERATING TEMPERATURE
It is prohibited to exceed the permissible media temperature!
Beware of the values for permissible operation (see chapter 3.2 Characteristic
values).
There must be sufficient ventilation around the device (see chapter 5.2 Setting
up).
NOTE The device heats up due to the motor and the temperature of the medium, as well as
compression.
The device is equipped with a thermal circuit breaker that switches off the device in the
event of overheating (see chapter 4.2.4 Motor thermal protection)
Fig. 2-1. 117047: Hot area on the device (left), rear view warning label (right)
Fig. 2-2. 117057: Hot area on the device (left), rear view warning label (right)