Welch MXPC 603 T - Storage

Setting up and connecting
26 Operating Manual MXPC 303 Z/603 T
Procedure
The device is supplied with a standard power cable that is connected at the port (Fig. 5-1/1).
Fig. 5-2. Main switch and mains connection (rear view)
5.6 Storage
The device must be stored in a dust-free and closed interior space. The conditions for storage
must be observed (see chapter 3.2 Characteristic values).
INFORMATION
During storage, all connections must be sealed with the protective caps supplied.
A different but equivalent closure can also be used for storage.