CMP201D User Guide
Multiplexing-SI Table Setting> This page is to choose whether to insert/generate the SI tables or
Copy the SI tables from the input streams.
Multiplexing-PID Transmission> This page is to transmit the input PID to Output on the PID
required by the system.
CM2-MOD-02 > Scrambling
CM2-MOD-02 Scramble is where you can encrypt a service on the Modulation Output. Scrambler
can be connected 6 different CAS simultaneously. There are seven tabs on this page namely Service
Scrambling and CAS1 to CAS6. 6 CAS tabs have the same interface.
Input the correct CA parameters on this page and make sure the ECMG and EMMG are connected
GREEN. Some CA will provide a Super CAS ID with 8 digits. This is a combination of the 4-digit CAS
System ID and 4-digit of ECMG Sub System ID.
To Next Page
Loading...
