Wellav CMP201D - Web GUI; Web GUI Overview; Connect the Management Port

To Next Page

To Previous Page

CMP201D User Guide

4 Web GUI

4.1 Web GUI Overview

4.1.1 Connect the Management Port

Factory network settings of the Management Port:

 IP address 192.168.1.10

 Subnet Mask 255.255.255.0

 Gateway 192.168.1.254

Take the following steps to access the Web GUI in a browser.

 Connect laptop/computer to CMP201D management port directly.

 Set the IP address of the laptop/computer in the same network segment with the CMP201D

Baseboard. CMP201D will occupy up to 7 IP addresses if it’s fully loaded as each module has its

own IP address including the baseboard. Please avoid possible IP address conflict between

management PC and CMP201D unit.

 Check the physical connection by ping command.

Other manuals for Wellav CMP201D