DMP900 User Guide
20
Add Network Information Table (NIT)
See the following image. Board3 [QAM A/C] is streaming output TS1, TS2 and TS3. Original
Network ID is 1. TS1 ID is 1, and TS2 with ID 2, TS3 ID 3. TS1 frequency is 474000 KHz, and TS2
482000 KHz, TS3 490000 KHz. 474 MHz (TS1) is the center frequency.
Steps to add NIT:
1. Right-click NIT Actual to edit Network ID and Network Name.
2. Right-click transport_streams to add TS1 (Original Network ID:1 and TS ID:1) .
To Next Page
Loading...
