Wellsys i12 - Specifications and Designations

i12 Manual Page 8 - Revision: 6-13-2023
MODEL/PART DESIGNATIONS
BRAND NAME
DESCRIPTION
MODEL -
PART NUMBER
i12
i12 – Hot, Cold, Ambient, Ice
i12
Z10561-(YYMMDD)-00(XXX)
CONSUMABLES
FILTER
REPLACEMENT FREQUENCY
PART NUMBER
SEDIMENT FILTER
6-12 MONTHS
ICESED
PRE-CARBON FILTER
12 MONTHS
ICEPREC
RO MEMBRANE (x2)
TEST TDS REDUCTION AT 12 MONTHS
ICERO
POST-CARBON FILTER
12 MONTHS
ICEPOSTCA
AIR FILTER
2 YEARS
51-0347-1
SPECIFICATIONS
ITEM
i12
Water Connection
¼” Quick Connect
Recommended Service
Water Pressure
50-70psi (0.5-7kgf/cm
2
)
Rate Voltage
AC 120V/60Hz @ 4.9Amps
Power Consumption
1.2A (120W) Cold Water & Ice Making; 500W Hot Tank ; 6.0A (720W) Max
Power Cord
1.9m (6.3ft)
IP Class
IPX1
Climate Class
N Class (32°C +/- 1°C) (89.6°F +/- 33.8°F)
Safety Device
Overheating protector. Water Level Detector. Leak Stop Device. Fuse.
Hot Tank Capacity
1.2gal (4.6L)
Ambient Tank Capacity
4.5gal (16.9L)
Cold Tank Capacity
1.2gal (4.6L)
Ice Production
44 lbs/day (19.9 kg/day)
Ice Storage Capacity
8.8 lbs (4 kg)
Environmental Temperature
Max: 90°F (32°C) Min: 35°F (2°C)
Source Water Temperature
Max: 90°F (32.2°C) Min: 40°F(4.5°C)
Relative Humidity
55% at 78°F(25.5°C)
Refrigerant Gas
R134a (3.10oz +/-0.03oz)
R134a Pressures
186Psig (12.8bar) High Side, 88Psig (6.1bar) Low Side