www.Welltec.pro 12
Usage
Raising the temperature
Press the „UP” button on the panel to raise the set temperature by 1°C.
The maximum temperature for cooling and heating mode is 31°C.
Temperature reduction
Press the „DOWN” button on the panel to lower the set temperature by
1°C. The minimum temperature for cooling and heating mode is 16°C.
Fan speed
Press the „SPEED” button on the panel to set the desired fan speed:
• Low speed (LOW) - the air conditioner fan operates at the slowest
speed.
• Medium speed (MEDIUM) - the air conditioner fan operates at
medium speed.
• High speed (HIGH) - t
he air conditioner fan is running at its
highest speed.
Timer
Press the „TIMER” button on the panel to program the time after which
the unit will turn off. Select the desired time by pressing the „TIMER”
button. Possible settings are 1 - 24h. Wait 5 seconds after choosing the
desired time to confirm setting.
Press the „TIMER” button when the air conditioner is off but connected
to power to schedule the air conditioner to turn on. After confirming
the selected time, you can use the buttons „UP” „DOWN” and „MODE”
to
set the desired temperature and operation mode of the air
conditioner.
To Next Page
Loading...