WELLTECH ATA-172 - Page 87

ATA Web user guide
87 / 114 2015/1/8
(Figure 9)
Step 3: Enter [Service Domain Setting] web page, check [Realm No.: 1] Settings, Use
[MACID.dat] file to load configuration.
 DHCP Option 66 (TFTP) (Please refer to DHCP Turbo and TFTP Turbo
documents)
Step 1: Install [DHCP Turbo + TFTPd32] software, then placed [MACID.dat] file into the
specified directory.
Step 2: In [Auto Provision Setting] web page, Set up [Provision Active: TFTP, Server
Auto Discover: DHCP Option 66 (TFTP)] (See Figure 10).
(Figure 10)
Step 3: In [Auto Provision Setting] web page, Check [TFTP Server] field, upload this data
(See Figure 11).
Note：If start TFTP Server at the same time, This field parameter can’t see data, Because
this data upload provision function by TFTP Server.
(Figure 11)
Step 6: Enter [Service Domain Setting] web page, Check [Realm: 1] Setting, Use
[MACID.dat] file to load configuration.
 DHCP Option 66 (TFTP)-2 (Please refer to DHCP Turbo document)
Step 1: Install [DHCP Turbo + TFTP Turbo] software, Then placed [MACID.dat] file into
the specified directory.
Step 2: In [Auto Provision Setting] web page, Set up [Provision Active: TFTP, Server
Auto Discover: DHCP Option 66 (TFTP)] (See Figure 12).
(Figure 12)