WERSI SONIC USER MANUAL
WERSI DIRECT LTD - 0800 084 2013 - www.wersidirect.com - info@wersidirect.com
Exit - Press this button to return to the Main Display.
Manual On / Off - Turns the sound On and Off.
Sustain On / Off - If ticked, the Sustain setting of the pedals
and footswitches will effect this sound channel.
Pitchwheel On / Off - If ticked, the Pitch Wheel will affect
this Sound Channel.
Aftertouch On / Off - If ticked, the aftertouch effect is active
for this sound channel.
Piano-Pedal On / Off - If ticked, the Piano Pedal effect will
affect this sound channel.
Octave - Use the + button to move up one or two octaves or
the - button to move down one or two buttons.
Detune - Use the + button to tune upwards in cents or the -
button to tune downwards in cents. (+100 & -100).
Transpose - Transpose the individual Sound Channel up or
down (+12 semitones and -12 semitones).
Changing the sound from within the Sound Controller
You can change the sound for the Sound Channel by double tapping the Sound button:
x2
The Sound Selection Display looks as below:
From here, you can select any sound from the Sonic sound library.
There are many more sounds available from this display:
See Chapter X for a
description of the
Sound-Selection Display.