Page 10
2019
5.0: LUBRICATION
Please refer to the Whyte General Instruction Manual for guidance about lubricating
many of the components on your Whyte bicycle.
For the range of bicycles contained in this Supplementary Service Manual, there is
also the following specific guidance:
5.1: WHYTE INTER GRIP SEAT CLAMP
5.2: GENERAL WHYTE LUBRICATION
For the correct lubrication regime and maintenance of all parts on a Whyte bicycle,
please refer to the specific component manufacturers detailed instructions bundled
with this manual or for further information visit the specific manufacturers website.
6.0: SERVICING THE REAR SUSPENSION
6.1: Remove the Rear Shock, Links & Swinging Arm:
Tools Required: 2x 4mm Hex Key
1x 5mm Hex Key - Ball ended
1x 6mm Hex Key
1x 8mm Hex Key
2x T-25 Torx® Keys
WHYTE Service Manual
Figure 2: Capscrew Lubrication
Item Lubricant
Lubrication
Interval
Description
1
SKF LGEP2 or Castrol Spherol AP3 or Finish
Line Teflon White Lithium Complex grease
Once a Month
M6 x 30mm
Capscrew
To Next Page
Loading...
