Marine Installation Manual 2022-03 vii
List of Tables
X62DF-S2.0
List of Tables
1-1 X62DF-S2.0 summary values for Maximum Continuous Rating
(MCR). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
1-2 Principal engine features and technologies . . . . . . . . . . . . . . . . . . . . . . 1-3
1-3 The iCER technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
1-4 Rating points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
1-5 Principal engine dimension values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
1-6 Fuel split (energy-based) for different operating modes . . . . . . . . . . . 1-9
1-7 Shaft power meter parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11
2-1 Line 5 coefficients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8
2-2 Line 6 coefficients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9
2-3 Line 10 coefficients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
3-1 Engine dimensions and masses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
3-2 Electrical power requirement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
3-3 Advantages and disadvantages for the standard and narrow engine
foundation layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11
3-4 Recommended quantities of fire extinguishing medium . . . . . . . . . . . . 3-22
4-1 Common and independent systems in twin-engine installations . . . . . 4-2
4-2 Recommended specifications for raw water . . . . . . . . . . . . . . . . . . . . . . 4-20
4-3 Heating cable specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-31
4-4 Minimum inclination angles for full operability of the engine (1) . . . . . 4-35
4-5 Minimum inclination angles for full operability of the engine (2) . . . . . 4-36
4-6 Minimum inclination angles for full operability of the engine (3) . . . . . 4-37
4-7 Gas specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-41
4-8 Purity of inert gas (engines with iGPR) . . . . . . . . . . . . . . . . . . . . . . . . . . 4-62
4-9 Purity of inert gas (engines with GVU). . . . . . . . . . . . . . . . . . . . . . . . . . . 4-62
4-10 Specification of the pilot fuel oil filter on the system side. . . . . . . . . . . 4-67
4-11 Specification of automatic self-cleaning filter in feed system. . . . . . . . 4-76
4-12 Specification of automatic self-cleaning filter in booster system. . . . . 4-77