Suction tube with level control
Only use the suction tube with sufficiently stable containers. Narrow and
tall containers can tip if the suction tube is pulled.
Do not place the suction tube for the rinse aid in the container with de-
tergent or vice versa.
Do not pull unnecessarily on the suction hose or main power cable, as
this may lead to a defect.
As an option with your machine you may have one or more suction tubes with level control:
Changing the container (same product)
Possible risk of chemical burn
Wear protective clothing, protective gloves and protective goggles when
handling chemicals.
Clean the suction tube under running water.
Ensure that both vent holes (1) in the cap are open.
Place the suction tube in the new container.
Slide the cap downwards until the container opening is closed.
To Next Page
Loading...
