The dishes do not dry on
their own
No or low rinse aid dosing
Contact an authorised
service technician to set
the dosing amount.
Check dosing hose (for
kinks, breakage, ...)
Replace the storage con-
tainer if empty.
Rinse temperature is too
low
Contact an authorised
service technician to set
the temperature.
18 Servicing and maintenance
The following materials must not be used for cleaning:
detergents containing chlorine or acid
foaming products
cleaning sponge or wire brush containing metal
abrasives or abrasive cleaning agents
Do not spray the machine and the surrounding area (panels, base)
using a water hose, steam-jet air ejector or high-pressure cleaner.
Ensure that the base of the machine is not flooded when cleaning the
floor in order to prevent an uncontrolled inflow of water.
Wear protective clothing and protective gloves before touching parts in
contact with wash water (curtains, filters, wash arms, etc.).
Ensure that there are no rusty foreign objects in the machine which could
cause even the "stainless steel rust-free" material to start rusting. Rust
particles can come from non-rust-free wash items, cleaners, damaged wire
racks or non-rust-protected water lines.