Additionally for machines with dual rinse
Remove and clean the strainer and wash arms.
Re-insert the strainer and wash arms after cleaning.
When inserting the wash arms, pay attention to the different jets.
5a: Wash arm in the rinse zone
5b: Wash arm in the main wash zone / pre-cleaning zone
Additionally for machines with pre-cleaning zone
Remove and clean wash arms.
Re-insert the wash arms after cleaning.
Terminating the drainage programme
Press the button.
The tank of the machine is refilled and heated.
Cleaning the outside of the machine
Clean the operating panel and display with a moist cloth.
Clean the external surfaces using a stainless steel cleaner and stainless steel polish.
After cleaning
To Next Page
Loading...
