9.3.5 Changing the washing programme
Programme 2 is already pre-selected when the machine is ready.
Select a different washing programme by tapping the or button.
The button has a blue border.
9.3.6 Terminating the washing programme
Press the start button or .
9.3.7 Changing the tank water
If the tank water is very dirty and the end wash result is suffering, the tank water can be replaced.
INFO It takes a few minutes until the machine is ready for operation again, as the tank is first emptied
and then refilled.
9.3.8 Wash breaks
Do not switch the machine off during wash breaks.
Close the door to prevent the machine from cooling down.
9.4 Switching the machine off
Switch the machine off at the end of the working day using the guided self-cleaning programme (2) so that it
is cleaned and emptied every day ( 11.1).
INFO If you use the On/Off button (1), the tank stays filled but will no longer be kept at temperature. If the
tank temperature has dropped too much before the machine is switched on again, the machine will
be emptied and refilled automatically.
To Next Page
Loading...
