Winterhalter UC-L - Safety notes; Operator obligations; User obligations; Qualification requirements for personnel

Before working with the machine
4
4 Before working with the machine
 Have the machine set up by an authorised service technician or your dealer.
 Have the machine connected according to local standards and the regulations of the authorised techni-
cians (water, waste water, electrical system).
 After connecting the water and the power properly, contact the relevant Winterhalter engineer or your
dealer for the commissioning of the machine and for providing training in its operation. Have yourself and
your operating personnel trained in the operation of the machine.
5 Machine description
5.1 Overview
Item
Description
1
Display
2
Suction tube (optional)
3
Integral storage tank for rinse aid and detergent (optional)
4
Door
5
Filter bottom
6
Strainer
7
Filter cylinder
8
Wash field
9
Integral water softener (optional)
10
Tank heating element
5.2 Mode of operation
After the machine is switched on, the boiler and the tank are filled and heated up to the operating tempera-
ture. Once the rated temperatures are reached, the machine is ready for use.
The machine is fully automatic with programmes consisting of three steps: Wash, Drain and Rinse.