Initial setup
12
The WMF 500 is equipped with 4 different energy saving modes:
> Set the result of the carbonate hardness test with
–
or
+
.
> Confi rm the water hardness with
P
button.
Energy saving mode Method of working of the WMF 500 Percentage of maximum
consumption
(determined as per
SAFE*)
1
Both heaters are continuously ready for use.
Coffee, milk, milk foam and hot water can be dispensed without having to wait. 100 %
2
(Factory setting)
Hot water is held at operating temperature continuously. Coffee, milk,
milk foam and hot water can be dispensed without having to wait.
The steam heater goes to stand-by after 5 minutes.
89 %
3
Both heaters go to stand-by after 5 minutes. Coffee, milk, milk foam
and hot water can be dispensed after a short waiting period.
83 %
4
The coffee heater goes to stand-by after 5 minutes. Coffee and hot water
can be dispensed after a short waiting period. The steam heater is off.
Milk and milk foam can be dispensed after a short waiting period.
52 %
* Measuring method as per SAFE
Setting water hardness
To Next Page
Loading...
