Operation
27
> Use the
–
or
+
buttons to set whether a war-up rinse should be
carried out when you brew an Espresso again after an interval in
dispensing.
> Confi rm your selection with
P
button.
All the basic settings and beverage settings are reset to factory
setting with the setting of "Yes".
> Set the factory setting to "Yes" with
–
or
+
.
> Confi rm your selection with
P
button.
> Set the display contrast with
–
or
+
.
> Confi rm your selection with
P
button.
Warm-up rinse
Factory setting
Display contrast
To Next Page
Loading...
