Need help?Do you have a question about the Wolf Secure Wolf Guard and is the answer not in the manual?
General| Brand | Wolf Secure |
|---|---|
| Model | Wolf Guard |
| Category | Security System |
| Language | English |
Guidance on unit cover, internal parts, and system modification restrictions.
Precautions regarding power supply ratings and siren installation.
Diagram illustrating the components and layout of the alarm panel's front.
Visual representation of the alarm system's LCD screen and icons.
Diagram of the back panel, including power, SIM, and wired ports.
Description of each terminal in the wired block and its purpose.
Warning about potential damage from connecting larger sirens directly.
Steps for inserting and initializing the SIM card for system setup.
How to access settings and understand the two password types.
Methods to exit the system's settings mode manually or automatically.
Instructions to restore the system to its default factory settings.
Process for coding and registering remote controllers to the alarm host.
Steps to remove paired remote controllers from the system's memory.
Linking wireless sensors to specific defence zones for detection.
Removing defence zones from the system's active configuration.
Procedures for modifying user and programming passwords.
Guide for configuring the date and time on the alarm system.
Setting specific times for automatic arming of the system.
Setting specific times for automatic disarming of the system.
Enabling or disabling the automatic arming/disarming feature.
Inputting and saving phone numbers for alarm notifications.
Removing phone numbers from the system's contact list.
Configuring numbers to receive SMS alerts from the system.
Removing numbers from the SMS alert receiving list.
Configuring zone attributes like type, location, and siren activation.
Setting specific zones to be active or inactive during Home Arm mode.
Recording custom voice messages to be played during alarm calls.
Enabling or disabling the siren for arming/disarming indications.
Setting the siren's behavior during emergency or panic events.
Reviewing past alarm events and their specific details.
Enabling SMS notifications for system arming and disarming events.
Verifying GSM signal quality at the installation site for reception.
Customizing specific siren sounds for arming and disarming actions.
Enabling or disabling system voice prompts for various operations.
Enabling or disabling all system voice prompts, including arm/disarm.
Operating wireless devices like sirens and strobes via the system.
Adjusting the delay period for zone alarms to activate.
Configuring tamper detection and retrieving system IMEI code.
Understanding system states and basic remote controller functions.
Using the alarm keypad for essential system control operations.
Steps for arming and disarming the system via the keypad.
How the system alerts users via calls and how to control it.
Using the system as an intercom and receiving power failure alerts.
Key technical data including voltage, current, frequency, and volume.
Pre-configured settings for zones, passwords, and siren duration.
List of hardware components provided with the alarm system package.
Advice on protecting the system from damage and environmental factors.
Scheduled checks for system functionality and components like detectors.
Key recommendations for safe and effective system use.
To Next Page