Timing Control
While in settings mode, use the keypad to enter [39], then input the number indicating turning on
timely arm/ disarm [1/0], and then input [#] to confirm. You will hear a long beep and a voice
prompt “setting completed”. The factory default is off.
Operating method: [39][0/1][#]
0: turn off the function of timely arm/ disarm
1: turn on the function of timely arm/ disarm
For example: turn on the function of timely arm/ disarm
Operating method: [39][1][#]
11. Telephone/cellphone Number Settings
While in settings mode, use the keypad to enter [51] ~ [56], then input the voice alarm receiving
number (mobile number or telephone number), and then press [#] to confirm. The main unit will
make a long beep, the [Signal] indicator will flicker once, and you will hear “setting completed”,
which indicate number is set successfully.
Operating method: [XX][YY…YY][#]
XX indicates: the 1- 6 alarming user number [51] ~ [56]
YY…YY indicates: voice alarm-receiving phone number
For example: set 13811111111 as the first voice call number
Operating method: [51][13811111111][#]
LCD display:
8
12. Delete Phone Number
While in settings mode, use the keypad to enter [51] ~ [56], and then press [#] to confirm, the alarm
unit will make a long beep and the [Signal] indicator will flicker once and you will hear “delete
completed”, which indicate the alarming user number is deleted successfully.
Operating method: [XX][#]
XX indicates: the 1- 6 alarming user number [51] ~ [56]
For example: Delete the third alarming user number from the system.
Operating method: [53][#]
LCD display:
Page 13 Wolf Secure http://www.wolfsecure-gsmalarms.co.za
To Next Page
Loading...