Wolf CSO24TE/S - Page 39

Configure the Instruction Signal
1
Touch Settings twice. The Settings menu appears.
2 Touch the right arrow key to move to Configure
Notifications.
3 Touch Enter. The Configure Notification screen appears.
4 Use the arrow keys to underline Switch Button Signal on or
off .
• An instruction signal is a tone that occurs when the
unit is providing instructions to the user.
• A check mark means that the instruction signal is on.
5 Touch Enter to turn the instruction signal on or off.
6 Use the arrow keys to move to Back.
7 Touch Enter to return to the Settings screen.
Configure the Instructions
1
Touch Settings twice. The Settings menu appears.
2 Touch the right arrow key to move to Configure
Notifications.
3 Touch Enter. The Configure Notification screen appears.
4 Use the arrow keys to underline Switch Instructions on or
off .
• Instructions occur when the unit is providing
instructions to the user.
• A check mark means that the instructions are on.
5 Touch Enter to turn instructions on or off.
6 Use the arrow keys to move to Back.
7 Touch Enter to return to the Settings screen.
CSO (SWS #13543126)
Settings
Configure the Instruction Signal (continued)
service.subzero.com
827703 REV B.1
39