32
3064458_201811
Emissions test mode is activated by simultaneously pressing and holding
keys (6) and (7) for 5 s.
This mode will now run for up to 15 min,
i.e. it is automatically terminated after this time has elapsed.
It can be terminated sooner by pressing key (4).
The heating appliance starts and initially switches to upper load.
Enabling emissions test mode
Emissions test upper load
Emissions test lower load
(for adjusting the CO
2
)
Disabling emissions test mode
7
6
Emissions test mode
Reset key (4)
1
2
(5 seconds)
1
2
4
7
6
Display subject to
appliance version
15. Control unit
To Next Page
Loading...
