Wood-mizer MP200 E6S - Roller Drive Chain Tension Adjustment; Long-Term Storage

MAINTENANCE
Long-term storage
4
4-6 doc021023 MAINTENANCE
4.4.4 Roller drive chain tension adjustment
1. Unbolt and remove roller drive chain cover (A).
2. Loosen tensioner bolt (B). Move the tensioner up/down to tension the chain properly.
4.5 Long-term storage
If the machine is not used for a long period of time, do as follows:
 Disconnect the power cord.
 Perform all routine actions described above.
 Remove the knives with mounting strips or clamping wedges and store them well lubricated in
above zero temperature.
 Loosen the motor belt tension.
 Spray a thin layer of anti-rust coating (such as P.D.R.P) onto the places not protected against
rusting.
 Store the machine in a well ventilated room.
 Cover the planer/moulder.
FIG. 4-4
A(2)
B
A
B