32
Problem connecting? Visit wrensound.com/support for additional help.
To play music on your
Wren V5US, make sure that
Bluetooth is turned on and
the V5US14 has been selected
on your source device. Then
simply select your favorite
music on your device and play.
Select V5US14_xxxxxx. If
your source device asks for a
passkey, enter “0000” (four
zeros) and press “OK.” The
Bluetooth indicator on the
V5US will blink amber two
times per second when pairing
is in progress
(Figure 3).
A message will appear on
your source device to indicate
when pairing is complete,
In addition, the Bluetooth
indicator on the V5US will go
from blinking amber to solid
blue
(Figure 4). You are now
ready to play music wirelessly
on your V5US.
Figure 3 • Pairing
blinking
amber
Figure 4 • Connected
solid
blue
Connect to your V5US using Bluetooth (cont.)
To Next Page
