Safety instructions LF 170
76
ba54104d09 11/2010
2.2 Authorized use
The authorized use of the LF 170 monitor consists solely of stationary
measurement in water and wastewater applications, seawater,
brackish water and aquacultures. Read the technical specifications in
accordance with chapter 8 T
ECHNICAL DATA. Only operation and use
according to the instructions in this operating manual is authorized.
Any other use is considered as unauthorized. Unauthorized use
invalidates any claims with regard to the guarantee.
2.3 General safety instructions
The LF 170 monitor is manufactured and tested in accordance with the
relevant guidelines and standards for electronic instruments (see
chapter 8 T
ECHNICAL DATA). It left the factory in perfect condition.
Function and
operational safety
The flawless functioning of the LF 170 monitor is only guaranteed if
attention is paid to the generally accepted safety measures and the
special safety instructions in this operating manual during use.
The flawless functioning and operating safety of the LF 170 monitor is
only guaranteed under the ambient conditions specified in chapter 8
T
ECHNICAL DATA.
Safe operation Assuming that risk-free operation is no longer possible, take the LF 170
monitor out of operation and secure it against unintentional operation.
Risk-free operation is no longer possible if the LF 170 monitor:
z has been damaged in transport
z has been stored under adverse conditions for a lengthy period of
time
z is visibly damaged
z no longer operates as described in this manual.
If in doubt, contact the supplier of the LF 170 monitor.
To Next Page
Loading...
