LF 170 Indexes
127
ba54104e09 11/2010
9Indexes
This chapter provides additional information and orientation aids.
z List of display abbreviations (see section 9.1)
z Definition of terms (see section 9.2)
z Index (see section 9.3)
9.1 Display abbreviations
Configuration
Parameterization
of main level
Cod Password
C0 Starting point of the configuration level
Crn Measuring mode and range
CR1 Current output 1
CR2 Current output 2
rEC Analog output
Crc Relay function
nF No function
PS Mains voltage monitoring
FRC Signaling relay with "frozen" output
UL.LL Limit monitor
CS Cleaning system
CrF Relay switching behavior
O Normally closed (relay)
C Normally open (relay)
PA Starting point of the parameterization level
Pr1 Current output 1
Pr2 Current output 2
PL Limit monitor
PIF RS 485 interface
PCd Password
Pt Temperature balancing
Ptr Reference temperature
To Next Page
Loading...
