Operation LF 170
110
ba54104e09 11/2010
4.8 Display of instrument information
The following information can be called up:
z Configuration data. For this, switch to the configuration level. Press
<ESC> during the password prompt to view all settings in view mode
(see section 4.4.1 C
ALL UP CONFIGURATION LEVEL).
z Parameterization data. For this, switch to the parameterization level.
Press <ESC> during the password prompt to view all settings in
view mode (see section 4.5.1 C
ALLING UP THE PARAMETERIZATION
LEVEL).
z Cell constant
z Process for temperature compensation
z Software version
Viewing the cell
constant and software
version
To call up the selected cell constant, press <ENTER> in the measured
value view (operating level)
The set process for temperature compensation is also displayed in the
second display line:
– nLF: Temperature compensation using nonlinear temperature
function
– (numeric value) %/K: Temperature compensation using nonlinear
temperature function with the specified temperature coefficients.
– ----: No temperature compensation
Swap to the display of the software version (So) with <UP><DOWN>:
Return to the measured value display with <M>.
To Next Page
Loading...
