Operation LF 170
114
ba54104e09 11/2010
The tSt display flashes. The
RS 485 communication test is
active.
The RS 485 interface works as a
repeater, i.e. all received blocks
are sent back again.
Special commands:
– The monitor sends the
instrument identification
according to the RS command
"RSID" with
RS 485 protocol
with <ESC>
– The monitor sends the
instrument identification
according to the RS command
RSID" without
RS 485 protocol
(e.g. for printer output) with
<UP>
– Terminate the test with
<ENTER>.
11 Return to the operating level with
<M>.
To Next Page
Loading...
