What to do if ... LF 170
118
ba54104d09 11/2010
The current output
delivers no current
Err
AoPt
Note
More possible errors and their remedies are given in the operating
manual of the conductivity measuring cell.
– Incorrect reference
temperature set
– Correct set reference
temperature
Cause Remedy
Cause Remedy
– When wiring with the flow
control its switching threshold
was undercut
– Check the current output in test
mode (see section 4.9).
– Reset the flow-through
Cause Remedy
– Hardware error – Contact WTW
To Next Page
Loading...
