Wurtec S3 Communicator Master Station - Quick Set-Up (Onboard Keypad) - Continued; Adjusting Conversation Volume

10 Buy Online! Wurtec.com
Quick Set-Up (from onboard keypad) cont.
Adjusting Conversation Volume
STEP 1 Be sure the phone is connected to a live telephone line and has either external
power connected or a 9V battery. If you have both the external power and a 9V
battery connected, be sure the battery is rechargeable or it could result in a battery
explosion.
STEP 2 To increase the volume of the person you are speaking to fi rst press the
TALK
/ END
key. If you have a live telephone line, the phone will say “Please enter number to
be dialed” and then you will hear a standard dial tone. DO NOT dial a number.
Once you hear the dial tone, Press the
TALK
/ END
and
VOL UP
keys at the exact same time
and then release. You will hear your dial tone increase in volume. Continue to
press the
TALK
/ END
and
VOL UP
keys at the same time and then release until the desired
volume is reached. The phone will say “Invalid Entry” once the maximum volume
is reached. There are 8 volume settings. When fi nished press
TALK
/ END
to hang up the
phone.
STEP 3 To decrease the volume of the person you are speaking to fi rst press the
TALK
/ END
key.
If you have a live telephone line, the phone will say “Please enter number to be
dialed” and then you will hear a standard dial tone. DO NOT dial a number. Once
you hear the dial tone, Press the
TALK
/ END
and
#
VOL DN
keys at the exact same time and
then release. You will hear your dial tone decrease in volume. Continue to press
TALK
/ END
and
#
VOL DN
keys at the same time and then release until the desired volume is
reached. The phone will say “Invalid Entry” once the lowest volume is reached.
When fi nished press
TALK
/ END
to hang up the phone.