Wurtec S3 Communicator Master Station - Testing the Phone Line - Continued; Phone Line Volume

Buy Online! Wurtec.com 19
Testing the Phone Line (cont.)
STEP 1 Press
TALK
/ END
key on the keypad.
STEP 2 If you do not have a valid telephone line the phone will say “invalid telephone line”.
At this point you will need to trouble shoot the telephone line or call the telephone
service provider. If your phone line is valid, the phone will say “Enter number to
be dialed” and you should hear a standard dial tone. At this point you can dial the
emergency number to verify it works or you can press
TALK
/ END
to hang up the phone.
Phone Line Volume
STEP 1 Be sure the phone is connected to a live telephone line and has either external
power connected or a 9V battery. If you have both the external power and a 9V
battery connected be sure the battery is rechargeable or it could result in a battery
explosion.
STEP 2 To INCREASE the volume of the person you are speaking to fi rst press the
TALK
/ END
key. If you have a live telephone line, the phone will say “Please enter number to
be dialed” and then you will hear a standard dial tone. DO NOT dial a number.
Once you hear the dial tone, Press the
TALK
/ END
and
VOL UP
keys at the exact same time
and then release. You will hear a beep and your dial tone increase in volume.
Continue to press the
TALK
/ END
and
VOL UP
keys at the same time and then release
until the desired volume is reached. The phone will say “Invalid Entry” once the
maximum volume is reached. When fi nished press
TALK
/ END
to hang up the phone.
STEP 3 To DECREASE the volume of the person you are speaking to fi rst press the
TALK
/ END
key. If you have a live telephone line, the phone will say “Please enter number to
be dialed” and then you will hear a standard dial tone. DO NOT dial a number.
Once you hear the dial tone, Press the
TALK
/ END
and
#
VOL DN
keys at the exact same time
and then release. You will hear a beep and your dial tone decrease in volume.
Continue to press the
TALK
/ END
and
#
VOL DN
keys at the same time and then release until
the desired volume is reached. The phone will say “Invalid Entry” once the lowest
volume is reached. When fi nished press
TALK
/ END
to hang up the phone.