Page 42 of 42 pages
6.2 Care and handling of the batteries
Read the instructions in your manual before installing batteries. Make sure to insert the batteries properly,
following the symbols showing you the correct way to position the positive (+) and negative (-) ends of the
batteries. Keep battery contact surfaces clean by gently rubbing with a clean pencil eraser or cloth. Replace
batteries with the size and type specified by the device's manufacturer. Remove all used batteries from the
device at the same time, then replace them with new batteries of the same size and type. Store batteries in a
cool, dry place at normal room temperature. Remove batteries from devices that will be stored for extended
periods. Don't dispose of batteries in a fire—they may rupture or leak. Don't recharge a battery unless it is
specifically marked "rechargeable." Attempting to recharge a normal battery could result in rupture or leakage.
7. REPAIR OF MEASURING INSTRUMENTS
Normally any instruments requiring repair can be sent to the local WYLER partner (local distributor) who will
take the necessary steps and make the arrangements for repair on behalf of the customer.
Express Repair Service, ERS
A large number of customers can not miss the instruments for a longer period as these are in daily operation.
For these cases WYLER SWITZERLAND has created a new service called "Express Repair Service, ERS".
Employing this service the transport time from the user to WYLER SWITZERLAND and back and thus the
complete repair time can be reduced considerably.
A simplified description of this service:
• The customer announces the repair request to the local WYLER partner in his country.
• The WYLER partner will inform the customer about the possibility of the ERS service outlining the
advantages and consequences of this service, such as e.g.
o reduced total repair time
o required acceptance to repair without quote up to 65 % of the price for a new instrument
o suitable packing for air transport
o expenses of the ERS
• In case the customer decides to use the ERS, the customer informs the local WYLER partner or directly
WYLER SWITZERLAND providing the necessary data.
• The customer will receive all information and instructions necessary for a smooth handling, the
customer has just to pack the product suitably and to fill in a form for the TNT courier service as well
as to announce the readiness to the local TNT office for pick-up. Everything else will run automatically.
• Products reaching WYLER SWITZERLAND under this service will be handled with first priority, and
the instrument will be returned using the same carrier.
• The invoicing will be through the WYLER partner in your country.
Please do not hesitate to make use of this service in order to have your WYLER instrument back at your
disposal as soon as possible. In case of any questions please contact WYLER SWITZERLAND or your local
distributor, we will gladly help you to use the ERS successfully.
WYLER AG
Im Hölderli
CH-8405 WINTERTHUR
Switzerland
Tel. 0041 (0) 52 233 66 66
Fax. 0041 (0) 52 233 20 53
Homepage: http://www.wylerag.com
E-Mail: wyler@wylerag.com
File: NT_ENG.doc
July 20/1999
To Previous Page
Loading...
Need help?
General
