Materials List
2 Freedom XC PRO Owner's Guide
Materials List
The Freedom XC PRO base package includes the following
items:
n one Freedom XC PRO unit
n one Owner’s Guide and extra safety labels
n one pre-installed DC ground enclosure lug (not shown)
n one set of plastic bushings for large DC cables (not shown)
n two AC knockout hole plugs (not shown)
Figure 1 What’s In The Box
NOTE: If any of the items are missing, contact Xantrex or any
authorized Xantrex dealer for replacement. See Contact
Information on page ii.
Key Features
Power for Most Appliances
The Freedom XC PRO inverter/charger provides up to 2000watts
(Freedom XC PRO 2000) or 3000watts (Freedom XC PRO 3000)
of continuous utility grade, sine wave power derived from a battery
bank. It is designed to handle loads such as microwave ovens,
TVs, DVD/Blu-ray players, and power tools. In addition, the
Freedom XC PRO’s high-surge capability lets you handle many
hard-to-start loads, including full size residential refrigerators.
The built-in transfer switch automatically transfers between
inverter power and shore power from recreational facilities such as
boat docks or campsites to ensure power is always available.
Back-up Capability
If incoming shore power is interrupted by external events like
brownouts, the Freedom XC PRO automatically becomes an
independent power source
1
that supplies utility grade AC power to
your loads.
1
Assuming the inverter/charger is connected to a battery source with an adequate charge at the time of the
power interruption.
To Next Page
Loading...
Need help?
General
