Xantrex GT3.0 - Figure 1-3 Safety and Data Label Locations; Safety and Standards

About the Xantrex Grid Tie Solar Inverter
975-0131-01-01 1–5
Safety and Standards
Meets standards and
requirements
The GT Inverter has complete on-board over-current, over-temperature and anti-
islanding protection, and meets U.S., Canadian and international safety operating
standards and code requirements:
• UL 1741 – Standard for Inverters, Converters, and Controllers for Use in
Independent Power Systems
• CSA C22.2 No. 107.1-01 General Use Power Supplies.
Figure 1-3 shows the location of the safety label and the data label with model,
serial and part number information.
Figure 1-3 Safety and Data Label Locations
Safety Label
Location
Data Label
Location