Mounting the Inverter
975-0131-01-01 2–15
Mounting the Inverter
Overview
General installation
steps
There are four main steps in the installation of the GT Inverter:
1. Mounting the GT Inverter and installing accessories (this chapter)
2. Making the DC connections from the PV array to the GT Inverter
(“Connecting the DC Wiring” on page 3–4)
3. Making the AC connections from the GT Inverter to the main utility service
panel (“Connecting the AC Wiring” on page 3–7)
4. Grounding the PV array (see your PV equipment documentation).
Figure 2-6 summarizes these four steps.
WARNING: Fire, Shock and Energy Hazards
Before installing the GT Inverter, read all instructions and cautionary markings located in
this manual, on the PV array, and on the main service panel.
Figure 2-6
Installation Overview
Utility Grid
PV Panels
Xantrex GT Inverter
Main Utility
Service Panel
Utility
Meter
600 Vdc
Open
Circuit
Maximum
Primary Earth/
Ground
Grid Tie Inv erter
1
2
3
4
To Next Page
Loading...
