Mounting the Inverter
975-0131-01-01 2–17
Installing the Mounting Bracket
The mounting bracket for the GT Inverter allows the unit to be easily mounted and
dismounted for servicing. It has two hooks that match corresponding hooks on the
back side of the inverter and wiring box. The inverter can be separated from the
wiring box and removed from the bracket, leaving the wiring box in place.
Figure 2-7
Dimensions of GT Inverter and Knockout Locations
40.3 cm
15.9"
55.0 cm
21.6"
69.6 cm
27.4"
72.5 cm
28.5"
14.6 cm
5.7"
5.8 cm
2.278"
2 cm (3/4") conduit
holes with threaded
caps, on both sides
Wiring Box
Side view Front view
Front Panel
Heat Sink
Cover
Flange and
Mounting Slots
Dual 2 cm or 2.5 cm
(3/4" or 1") knockouts,
back and bottom
To Next Page
Loading...
