xiii
This guide for use by qualified installers only
Important Safety Instructions
- - - - - - - - - - - - - - - - - - - vii
1
Introduction
Truecharge™ 2 Battery Charger - - - - - - - - - - - - - - - - - - - - - 1–1
Standard and Protection Features - - - - - - - - - - - - - - - - - - - - 1–2
Truecharge™ 2 Battery Charger - - - - - - - - - - - - - - - - - - - - - 1–4
Rear Panel- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–6
2
Installation
Preparing for Installation - - - - - - - - - - - - - - - - - - - - - - - - - - 2–2
Tools and Materials - - - - - - - - - - - - - - - - - - - - - - - - - - 2–4
Location - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2–5
Wiring Requirements - - - - - - - - - - - - - - - - - - - - - - - - - 2–8
DC Wiring - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2–8
AC Wiring - - - - - - - - - - - - - - - - - - - - - - - - - - - - -2–10
Battery Bank Size Requirements - - - - - - - - - - - - - - - - -2–12
Installing the Truecharge™ 2 Battery Charger - - - - - - - - - - -2–13
Installation Sequence - - - - - - - - - - - - - - - - - - - - - - - - -2–13
Mounting the Truecharge™ 2 Battery Charger - - - - - - - -2–14
Connecting the DC Chassis Ground (Earth) - - - - - - - - - -2–15
Installing DC Wiring - - - - - - - - - - - - - - - - - - - - - - - - -2–16
Installing AC Wiring - - - - - - - - - - - - - - - - - - - - - - - - -2–20
Powering Up - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -2–24
Installing Optional Accessories- - - - - - - - - - - - - - - - - - - - - -2–25
Installing the Optional Battery Temperature Sensor (BTS) 2–25
Mounting the Optional Remote Panel - - - - - - - - - - - - - -2–26
Contents
To Next Page
Loading...
Need help?
General
