iii
This guide for use by qualified installers only
About This Guide
Purpose
The purpose of this Installation Guide is to provide
explanations and procedures for installing and configuring
the Truecharge™ 2 Series Battery Charger.
Scope
The Guide provides safety guidelines, procedures for
installing the battery charger, as well as information on
configuring the battery charger. It does not provide details
about particular brands of batteries. You need to consult
individual battery manufacturers for this information.
Refer to Truecharge™ 2 Battery Charger Owner’s Guide
(doc. part number: 975-0401-01-01) for operational
instructions.
Audience
The Guide is intended for qualified installers who need to
install and configure any unit model of the Truecharge™ 2
Series Battery Charger. The installer should be a qualified
technician or electrician with knowledge and experience in
installing electrical equipment, knowledge of the applicable
installation codes, and awareness of the hazards involved in
performing electrical work and how to reduce those hazards.
To Next Page
Loading...
Need help?
General
