XCell ATF Series - Page 36

32
XCell
TM
ATF System with C410:V3 Controller
User Guide
The Start Up Guide page shows a Quick reference guide for the operator. This information
should be reviewed by all Users before operating the C410:V3 controller.
The Start Up Guide screen will display parameters in the following tables:
Button
Description
Basic Set Up
Press to switch to Basic Set Up Screen
Advanced Set Up
Press to switch to Advanced Set Up Screen
Calibration
Instrument Calibration
All Primary
All Primary Screen Buttons are displayed to navigate to those
screens
Ethernet Configuration, only accessible to the Administrator, the Ethernet Configuration
allows the administrator to set up the communication interface of the HMI and PLC units.
Note: The HMI must be set through the set connection function in windows light to the PLC
address for proper communication to occur.
See APPENDIX 4 for details on Setting IP Addresses and Setting Connection.
C.3
START-UP GUIDE
C.4
TCP/IP