XCell ATF Series - Page 38

34
XCell
TM
ATF System with C410:V3 Controller
User Guide
Button
Description
Accept Settings
This button will enable the new settings. Exiting the screen without
Accepting the settings will discard them.
Analog Input Select
This button will select which of the Analog Inputs is selected
Capture First
Calibration Point
This button will capture the raw input value for the first point for the
selected analog input
Capture Second
Calibration Point
This button will capture the raw input value for the second point for
the selected analog input
Actual Value
This button will finalize the two point calibration performed for the
corresponding line.
Basic Set Up
Press to switch to Basic Set Up Screen
Advanced Set Up
Press to switch to Advanced Set Up Screen
Help Guide
Press to switch to Start Up Guide Screen
Accept / Discard
Change
Accept Change and Discard Change to accept or reject any parameter
change on the screen.
All Primary
All Primary Screen Buttons are displayed to navigate to those screens