SETTING UP THE FIERY EXP4110 FROM THE CONTROL PANEL
29
Types of Setup screens
There are two types of Setup options:
To cancel without saving changes, press the Menu button. This cancels what you are doing in
the current screen to bring you to the next higher-level menu. You may need to press the
Menu button more than once to return to the top level for the particular Setup in which you
are working. When at the top level, you can enter a Setup menu again, or exit without making
changes.
When you have entered the settings, you must save the changes. You are usually prompted to
do so. If you choose Yes, your settings overwrite previous settings. If you choose No, your
previous settings are retained. If necessary, the Fiery EXP4110 restarts after you exit from the
Setup menu.
Multiple choice
questions
You are given choices that appear as buttons on the touch
panel (for example, Yes or No, or a list of options from which
to choose). Only one choice is displayed at a time, in
highlighted text. The currently selected value appears first.
Use the up and down arrow buttons to scroll through the
choices, OK when the correct information is displayed.
Information
entry options
You must specify the information for your site (the printer
name or IP address, for example). Use the up and down arrow
buttons to scroll through the alphanumeric symbols to make
your selection.
When you enter text, enter it from left to right. The left arrow
button acts as a delete key as well as a cursor-moving key. The
right arrow advances the cursor to the right when you enter
characters.
To Next Page
Loading...
Need help?
General