Xerox 4110

SETTING UP THE FIERY EXP4110 FROM THE CONTROL PANEL
44
Bindery Setup menu
Because you can set up more than one Novell server to handle Fiery EXP4110 print jobs, an
additional menu is displayed for this purpose. The options are as follows:
• Add File Server creates a new file server connection to the Fiery EXP4110. You can set up a
maximum of eight file server connections. After you have finished adding a new server, you
return to the Bindery Setup menu, where you can set up another server.
• View Server List displays the list of file servers that have already been selected to
communicate with the Fiery EXP4110.
• Edit Connection allows you to change the NetWare Print Server that will print to
the Fiery EXP4110.
• Remove File Server allows you to disconnect the Fiery EXP4110 from a file server to which
it is currently connected. Remove a file server when you want to reduce the number of
connections to the Fiery EXP4110 or reassign the connection to a different NetWare file
server.
• To Exit Bindery Setup allows you to exit this menu after you have added all servers, viewed
a list of file servers, or removed a file server from the list.
NOTE: If you change your mind about any of the menus you have selected, use the Menu
button to escape and return to the main Bindery Setup menu. To cancel all changes, exit
Network Setup and select No to Save Changes.
Add File Server
This option gives you two ways to add a Novell NetWare file server.
Select File Server
From List/Search by Name [From List]
You may select the file server from a scrollable list, or by a name search.
Choose From List if your network does not have a large number of file servers.
Network Setup
Service Setup
PServer Setup
Bindery Setup