ADMINISTERING THE FIERY EXP4110
96
5At the Log On to Windows dialog box, type Administrator in the user name field, type the
password, and the press Enter.
The password is case-sensitive and must be entered exactly.
6Wait for FieryBar to appear on the monitor and reach Idle.
The Fiery EXP4110 takes approximately three minutes to power on and reach Idle.
TO RESTART THE FIERY EXP4110
1Verify that the Fiery EXP4110 is not receiving, processing, or printing any files.
If necessary, wait until Command WorkStation shows no processing or printing jobs in the
Active Jobs window, or FieryBar shows Idle in both the RIPping and Printing areas.
2 Close all open applications except FieryBar.
3 Right-click FieryBar and choose Restart Fiery from the menu that appears.
4 Click OK when the confirmation message appears
Wait for the Fiery EXP4110 server software to close down and restart. You may need to wait
one minute or more for the server software to restart. FieryBar displays the Exited status while
the server software restarts.
To Next Page
Loading...
Need help?
General