Loading Paper
Xerox
®
B210 Printer
User Guide
107
Envelope Mode
1. Press to open the manual feed slot, located on the front
of the printer.
2. Remove any curl on the envelope before loading it into
the manual feed slot.
Note: For more information on media specifications,
refer to Media Specifications.
3. Load the envelope short edge feed and with the flap
facing down as shown in the illustration.
4. Adjust the paper guide to the width of the print material.
Note: If the media prints with curl, wrinkles, a crease, or
black bold lines, open the rear cover and print again.
5. After loading paper in the manual feed slot, ensure you
select the Paper option in the print driver to specify the
correct paper size and type. For the source, you must
select Manual Feed Slot. Not confirming the paper
details may result in printing delays.
6. After printing, close the manual feed slot.
To Next Page
Loading...
Need help?
General