Xerox Color J75 Press - Page 201

Remedy: Perform the following:
• Check the connection between the Interface Module and the connected finishing
device or devices.
• Fully clear any jams between the Interface Module and the connection finishing
device or devices.
• Ensure all jam clearance handles/levers are returned to their closed positions.
• After clearing all jams, remove any ejected paper from the finishing output area.
• Power Off/On the machine.
048-327
Cause: Interface Module communication failure or connection failure
Remedy: Perform the following:
• Check the connection between the Interface Module and the connected finishing
device or devices.
• Fully clear any jams between the Interface Module and the connection finishing
device or devices.
• Ensure all jam clearance handles/levers are returned to their closed positions.
• After clearing all jams, remove any ejected paper from the finishing output area.
• Power Off/On the machine.
048-900
Cause: Paper jam:
A jam notification is displayed on the UI.
• A jam occurred during feeding.
Remedy: Perform the following:
Carefully remove all sheets and paper scraps from the jam clearance areas.
Close the front door. Verify the paper used is within the approved paper specifications.
• Open the Interface Module front door.
048-901
Cause: Paper jam:
A jam notification is displayed on the UI.
• A jam occurred during feeding.
Remedy: Perform the following:
Carefully remove all sheets and paper scraps from the jam clearance areas.
Close the front door. Verify the paper used is within the approved paper specifications.
• Open the Interface Module front door.
13-13Xerox
®
Color J75 Press
User Guide
Interface Module