• Fully clear any jams between the Interface Module and the connection finishing
device or devices.
• Ensure all jam clearance handles/levers are returned to their closed positions.
• After clearing all jams, remove any ejected paper from the finishing output area.
• Power Off/On the machine.
048-322
Cause: Interface Module communication failure or connection failure
Remedy: Perform the following:
• Check the connection between the Interface Module and the connected finishing
device or devices.
• Fully clear any jams between the Interface Module and the connection finishing
device or devices.
• Ensure all jam clearance handles/levers are returned to their closed positions.
• After clearing all jams, remove any ejected paper from the finishing output area.
• Power Off/On the machine.
048-324
Cause: Interface Module communication failure or connection failure
Remedy: Perform the following:
• Check the connection between the Interface Module and the connected finishing
device or devices.
• Fully clear any jams between the Interface Module and the connection finishing
device or devices.
• Ensure all jam clearance handles/levers are returned to their closed positions.
• After clearing all jams, remove any ejected paper from the finishing output area.
• Power Off/On the machine.
048-325
Cause: Interface Module communication failure or connection failure
Remedy: Perform the following:
• Check the connection between the Interface Module and the connected finishing
device or devices.
• Fully clear any jams between the Interface Module and the connection finishing
device or devices.
• Ensure all jam clearance handles/levers are returned to their closed positions.
• After clearing all jams, remove any ejected paper from the finishing output area.
• Power Off/On the machine.
048-326
Cause: Interface Module communication failure or connection failure
Xerox
®
Color J75 Press13-12
User Guide
Interface Module
To Next Page
Loading...
