Xerox Color J75 Press - Page 215

Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Carefully remove all sheets and paper scraps from jam clearance areas.
049-117
Cause: Bypass path sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Carefully remove all sheets and paper scraps from jam clearance areas.
049-119
Cause: Bypass path sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Carefully remove all sheets and paper scraps from jam clearance areas.
049-121
Cause: Stacker exit sensor jam
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Carefully remove all sheets and paper scraps from jam clearance areas.
049-210
Cause: HCS front door sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Open the HCS front door.
• Carefully remove all sheets and paper scraps from jam clearance areas.
• Close the HCS front door.
049-211
Cause: HCS front door sensor fault
Remedy: Perform the following:
14-13Xerox
®
Color J75 Press
User Guide
High Capacity Stacker (HCS)