Xerox Color J75 Press - Page 216

Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Open the HCS front door.
• Carefully remove all sheets and paper scraps from jam clearance areas.
• Close the HCS front door.
049-212
Cause: Stacker up/down failure
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-213
Cause: Stacker up/down failure
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-214
Cause: Stacker cart sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-215
Cause: Stacker cart sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-216
Cause: Stacker cart sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-217
Cause: Stacker full sensor fault
Xerox
®
Color J75 Press14-14
User Guide
High Capacity Stacker (HCS)